A ring that's too big will spin on your finger, and one that's too small won't pass your knuckle. Here's how to find the right size in two minutes, without any tools.
Measure your finger size
- Cut a strip of paper about 1 cm wide.
- Wrap it around the base of your finger, without tightening.
- Mark the overlapping point with a pen, then unroll the strip.
- Measure the length obtained with a ruler, in millimeters. This is your finger size.
Then, refer to the table below with this measurement.
Size correspondence
| Size | Finger circumference | Inner diameter |
|---|---|---|
| 6 | 50.3 mm | 16.0 mm |
| 7 | 53.4 mm | 17.0 mm |
| 8 | 56.5 mm | 18.0 mm |
| 9 | 59.5 mm | 18.9 mm |
| 10 | 62.8 mm | 20.0 mm |
| 11 | 66.0 mm | 21.0 mm |
| 12 | 69.1 mm | 22.0 mm |
| 13 | 72.2 mm | 23.0 mm |
These measurements are from our ring manufacturer. If you are between two sizes, always choose the larger one; it's easier to adjust a ring that's too loose than one that's too tight.
Adjustable rings
Several of our models are open rings, available in one size. There's no need to measure; the ring gently expands to pass the knuckle then tightens at the base of the finger. They fit the vast majority of finger sizes, from approximately 6 to 12.
Three tips before ordering
- Measure at the end of the day, as fingers swell slightly throughout the hours.
- Avoid measuring when you are cold, as your finger retracts and can skew the result.
- A wide band is generally worn half a size larger than a thin band.
Still have questions? Please write to us before ordering, by email at support@naloraofficial.com or directly from our contact page.